Terrain & Scenery

My fellow pilgrims of the holy Trenches! Are you getting shelled with artillery, day and night, while you try to enjoy your time in the muddy, wet and miserable trench? Or do you want to have a rest after crusading, preferrably with a roof (or no roof) on top of your head? Then you need the Trench Terrain Bunker! For your Trench Warfare needs.Interior: Playable (top of the bunker is removable and being held in place with pegs that slot into the lower part)Scale: 32mmApprox. size of the bunker: 140 x 150 x 270mm (5.5 x 6 x 10.5") PRINTABLE WITH FDM or RESIN PRINTER. (FDM recommended, can be printed support free)Includes supported and non-supported files. For FDM printing the objects should be printable upright, support free. NOTE: PRINT THE ENTRANCE PART SO THAT THE SIDE THAT ENTERS THE BUNKER IS FACING DOWN (to avoid the overhang - see comment section for a picture if unsure of the correct orientation) Included:- Trench BunkerYou can also play this as a WW1 / Medieval watchtower! Just leave the top part off. NOW AVAILABLE: RUINED VERSION OF THE TRENCH BUNKER  Happy trenching!Update 8.1.2025: Version 4 (unsupported) - Enlarged the tower 5% to make it fit the hole on roof better. Adjusted the roof 1.5%Update 27.1.2025: Added supported/hollowed version of v4 bunker for resin printing and compiled everything into 1x .zip. Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE

My fellow pilgrims of the holy Trenches! The Holy Brutal Cross has been devastated! It now lies on the ground, such an unholy times we are living in!But now it provides nice cover for your Pilgrims, so maybe it was all just part of the Great Plan? This is perfect to be used in campaign games where you want your terrain to be destroyable. or if you want to have almost generic looking concrete rubble on your battlefield or trenches.Scale: 32mmLargest terrain piece approx. 100x60x80mm (length, width, height)Smallet terrain piece approx. 65x30x70mm (length, width, height) PRINTABLE WITH FDM or RESIN PRINTER. (FDM recommended, can be printed support free)Includes supported and non-supported files. For FDM printing the objects should be printable upright, support free. Included:- 4x different and unique pieces based on the Brutal Cross Happy trenching! Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE

My fellow pilgrims of the holy Trenches! Even the most Mighty of the Trench Bunkers cannot withstand against the Hellish artillery onslaught!  In rubble they stand, almost as mighty as before the ruination that finally fell upon them. This is perfect to be used in campaign games where you want your terrain to be destroyable. The top is designed so that one, or a few, miniatures should be able to stand there. Scale: 32mmSize: 200x170x91 (width, length, height)Model comes in one piece. PRINTABLE WITH FDM or RESIN PRINTER. (FDM heavily recommended, can be printed support free)Includes supported and non-supported files.  For FDM printing the object should be printable upright, support free. Included:- 1x Ruined Trench Bunker Happy trenching! Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE

My fellow pilgrims of the holy Trenches! Do you need a muddy, and overall very horrible place to hide (and die) from the bullets of your holy or unholy enemies? Look no further! This Trench System Bundle is for you! This bundle has a total of 46 different pieces you can use to build the trenches you have always dreamt to have! How to make a single piece of trench?1. Print a wall piece2. Print a topper piece3. Glue topper to the wall piece4. Attach walltopper piece to a 4cm foamNow you have one piece of trench ready! I recommend adding the wooden walkways on the bottom of the trenches. They help to blend the trenches with any kind of battlemat you are using. Scale: 32mmApprox. size of a wall piece: 50 x 40 x 10mm (2"x 1.6"x 0.5")Size of a wall piece is measured without a topper or the topper stubs. With an attached topper the depth of a trench is approx. 50-55mm. DESIGNED TO BE FDM PRINTED (SUPPORT FREE)(For resin printing supported files are not included, but designs are perfectly resin printable as well) You can print wall pieces in two different orientations, upright or laying flat. Other pieces just print flat. No supports needed. Included:- Total of 34x Trench pieces- 18x trench wall pieces- 12x corner pieces (3x different angle for inner / outer corners)- 11x trench wall toppers (includes 1x empty so you can make your own toppers if you wish)- 5x trench plank walkwaysUPDATE 9/2025:- Added toppers for corner pieces. To use these, you need to cut the middle peg off from the corner pieces with clippers. They slot into the farthest pegs. I recommend test printing a topper and wall piece to make sure everything fits as you expect. Happy trenching!Updates (latest update 9/2025:- Due to requests I added corner pieces to the set! Check the separate .zip. :)- Added toppers for corner pieces. To use these, you need to cut the middle peg off from the corner pieces with clippers. They slot into the farthest pegs. Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE

My fellow pilgrims of the holy (or unholy) Trenches! Is it too much to storm Trenches full of enemies that are waiting for you eagerly? Shell them with endless barrage of artillery fire first and you will have much better time! Inside this pack you can find everything to build the artillery emplacement that will spread fear from the depths of Hell all the way to the Heaven! DESIGNED FOR FDM PRINTING (most of the parts can be printed without supports)(For resin printing supported files are not included, but designs are perfectly resin printable as well) Included:- Huge Artillery Cannon/Gun- 7x Artillery Emplacement wall pieces- 3x Artillery Shell piles- 4x Artillery Shells- Artillery Shell Crate + lid (you can fit artillery shells inside if you'd prefer non-empty boxes) Happy trenching!Instructions:- The original size of the artillery, shell piles and boxes are HUGE - IF YOU WANT NORMAL/REALISTIC SIZE, DOWNSCALE TO 60% BEFORE PRINTING (you can also use the mockup pilgrim file figuring out the scale you want to print the cannon in)- Most of the parts can be printed without supports! Just put the flat side to the plate. If encountering problems, add supports.- If you want more Heretical or Biblical Artillery or Emplacements, I recommend sticking there some bits and pieces to decarate your favourite artillery emplacement.- Cannon is also included in the pack as whole piece, and separated from the carriage (for resin printing - Wheels are on separate file)- The Shell Piles are HUGE. Scale them smaller if you cannot fit them onto your print plate- 27.1.2025 Added separate .zip Artillery Cannon with pegs and pegholes as requested. Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE

My fellow pilgrims of the holy (or unholy) Trenches! Are your soldiers lacking cover? Does your No-Mans-Land look too much like No-Cover-Land? Then you have found your salvation! This scatter terrain package is perfect for Trench Warfare, so you can populate your Trench Battlefield with cover terrain/scenery! Works also perfect as part of a larger terrain project. DESIGNED FOR FDM PRINTING (support free FDM prints - supported files also included for resin printing) Included:- 14x Sandbag pieces- 3x Single Sandbags- 7x Barrels- 1x Large wooden platform (for barrels)- 1x Small wooden platform (for barrels) Happy trenching!Update 27.1.2025 (Free addon): I added some flat sandbag walls due to request. They are with either flat side or not. Flat side -> easier to make them look good when piled against a flat surface, like a trench wall. They are on a separate .zip.   Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE

My fellow crusaders of the Holy (and unholy) Trenches! Do you get tired of holding your own weapon or it just doesn't have enough caliber? Do you need a safe haven in the middle of warzone? Do you want to bring fear into your enemies hearts, while you blast their fortifications into thousand pieces? Look no further. Here is the first ever Trench Tank to solve your problems! This kit includes Trench Tank: S-ISU! Model is based on the ISU-152 design, but my hellish factory produced something of my own. I also included plenty of bits you can use to customize the tank as you want. AND as an extra, you get all the parts to create either very trenchified tank, or just a vanilla version, or anything in between!Scale: 32mmSize: Approx. 14x8x6cm (length, width, height - height is without the pyre)Size definition: A human trench miniature is standing about neck height to the mud guardCan be printed with: FDM or RESIN Included:- Trench Tank S-ISU (normal parts, closer to historical)- Trench Tank S-ISU (trench parts)- Check the pictures to see all the parts!- 6x different religious icon-plates- 2x wooden side armour plates- 1x metallic side armour plates- Tank chassis- Tank chassis with a pyre- Mud guards- Cannon- Cannon with attached corpses- BarrelsIncluded: Supported (+ hollowed) / non-supported and .Chitubox files of each partModel was test printed succesfully on FDM.Update v2:- Added carved versions of the barrels on top of the mud guards. Now you don't need to cut a piece off from the mudguard to be able to fit the barrels like in the render picture. Update v3 (Work done by a Diceverse subscriber / I checked the quality - thank you Anti!):-Added a cut version of Maria_Jeshua Icon panel-Standarised/equalized the sizes of icon panels-Two uncut panels are a bit larger - all complete/uncut panels have the same size Instructions for FDM printing:- The only parts that I suggest using supports are the ones with dead-bodies (Cannon pipe and files with the pyre) - otherwise everything should be printable without supports- If you get adhesion problems, I recommend using a raft.- Beginning of the printing process on some parts might look weird (looking at you tank-tracks) but just trust the process. This is the first part of my Tribes/Patreon February release. Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE

My fellow Trenchers!The Trench Tank S-ISU I made earlier seems to have met it's doom. In this package you will find 2x wrecked terrain pieces based on the S-ISU tank chassis.Both tanks have received very heavy damage and stood silently on the battlefield for many years. The other one has a ramshackle wooden platform (maybe a snipers nest or a lookout point).Scale: 32mmSize (approx.): 125x220x55 (mm)Can be printed with: FDM or Resin (size is so big that I didn't make this into resin printable, but you can support and hollow it yourself if you are a brave trencher!)Package includes:- 2x unique Trench Tank S-ISU terrain pieces This is the second part of my Tribes/Patreon February release. Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon CHECK THE REST OF MY TRENCH STLS HERE