The STL Trenches

No description

From the depths of Hell rise the unholy machinations that are called Warlock of Goetic Arts. These creations roam the no-man-land Trenches, following the commands of their masters on their endless hunt for flesh.


This multi-kit enables you to build a Warlock of Goetic Arts! I made the kit quite modular, so you can pose the Warlock in multiple ways / use different set of legs etc. Check below + pictures for more details!


Included in the pack (supported, non-supported and chitubox files):
- 40mm Base
- 5x Head variants
- 3x Leg variants
- 5x Arm variants
- 2x Torso variants ("Naval" with built-in-helmet and normal version)
- 1x Decorative Pedestal Concrete Slab


Measurements: The mini standing on a base is approx. 6cm tall (~2.4")
Scale: 28-32mm
Printability: RESIN recommended / not tested on FDM (test printed succesfully on resin)

An eerie silent automaton created by Unholy rituals awaits silently inside the Catacombs of the Knowledge. They serve no master but the ones that can answer their ancient riddles. If the daring explorers cannot find answers, they will have to face the centuries of Hatred stored inside these Golem constructs.


Inside this set you will find the Scripture Warden! Meant as an alternative miniature for your Trench warfare mercenary needs.

The miniature is basically a monopose, but the head and right hand are separate pieces for ease of printing & painting. If you are skilled on the 3d-kitbashing field, you should be quite easily be able to switch these out to alternative options if you so wish!

Included:
- Scripture Warden Body
- Scripture Warden head
- Scripture Warden right lantern hand)
- 40mm base

Scale: 28-32mm (miniature in the pictures is standing on a 40mm base)
Height: ~50mm
Printability: Resin printing recommended (test printed on resin). Non-supported, pre-supported and lychee files are included.

Me fellow unholy (or holy) pilgrims of the Trenches! Third part of my May 2025 Tribes/Patreon release is here!

During the starless night, from the cold endless depths of the northern Seas rises a threat against the Kingdom of Humankind. In the cover of darkness they arrive unseen, the sounds of waves masking their footsteps on the cold and wet coastal rocks. They storm lightning fast the coastal defences, slicing throats and destroying fortifications with elite efficiency. By morning there is only left bodies whose dead eyes shout silent cries of help.

This package includes multi-part Heretic Naval Raider (Death) Commando kit! The kit is designed so you'll be able to customize everything quite a bit - combining the different arm, head, body and weapon hand variants. Should fit perfectly to wet Trench Crusading needs.


So grab now my multi-part Heretic Naval Raider Death Commando kit with over 20 components!


Kit includes:
- 7x head variants
- 2x body variants (neutral + charging)
- 5x arm variants

Weapon arms included:
- Claw hand (Variant 1, neutral)
- Claw hand (Variant 2, open)
- Claw / Silenced Pistol hand
- Shield Claw / Claw Shield hand
- Sacrificial Knife hand
- Tormentor Chain hand


All arms and hands are available for both left and right side.

Scale: 32mm. (Height ~45mm / 1.77" without a base)

Printability: Resin printing recommended (2x merged versions for FDM printers included - not test printed)

Me fellow unholy (or holy) pilgrims of the Trenches! First part of my March 2025 release is here, Heretic Naval Raiders!

During the starless night, from the cold endless depths of the northern Seas rises a threat against the Kingdom of Humankind. In the cover of darkness they arrive unseen, the sounds of waves masking their footsteps on the cold and wet coastal rocks. They storm lightning fast the coastal defenses, slicing throats and destroying fortifications with elite efficiency. By morning there is only left bodies whose eyes shout silent cries of help.

This package includes a huge multi-part Heretic Naval Raider kit! Works great with Trench Crusade, but also with all other wargames (f.ex Battlehammer 40 000 or One Page Rules). With this pack you can make a total unique force, pose and equip them in limitless ways. Weapons/hands are compatible with Trench Crusade official Heretic models (and the official parts fit the Naval Raider torsos too). Disclaimer: no official co-operation yet exists! (I just thought people would appreciate being able to kit bash across these two sets).


Included:
- Multi-part Heretic Naval Raider kit with WAY over 50 components (check pictures to see the most essential components and assembly!)
This contains:
- 12x head variants
- 5x leg variants
- 2x body variants
- 10x different weapon options
- 2x different Trench Shields

Weapons included:
- Boarding Axe
- Trench Club
- Trench Knife
- Submachine Gun (Finnish Submachine Gun, Suomi-KP)
- Pistol (Mauser)
- Silenced Pistol (Mauser)
- Rifle (Gewehr98)
- Shotgun 2 handed (modified Gewehr98)
- Shotgun 1 handed (Sawed-off custom weapon)
- Stick Grenade (Gas)

Extra (for kitbashing):
- 2x different grenades
- flat versions of the trench shields (if you don't like the slight curvature) (+ trench shield without symbol)
- all of the weapon arms without weapons
- all of the weapons without arms
- extra arms without weapons

Many of the weapon options have multiple orientations for the arm (see pictures). The body attaches to the legs with a ball-joint -> you can rotate and customize the pose greatly.

Scale: 32mm.

From the Dark Depths of the Cold Artic Sea arises the fear of all creation, the Naval Raider Heretic Priest!

This kit includes the Leader of Heretical Naval Raider Forces: The Naval Heretic Priest!

I did some research and included inside the kit one of the favourite combinations of weapons and loadouts for the Priest (though taste may vary of course!). If there are a lot of people asking for additional loudouts and the kit happens to be popular, I might do some expansions for it at a later date! :)

Includes:
- Naval Raider Heretic Priest
- 7x head variants
- Gas & Normal Grenades
- Separate weapons
- Weapon arms below
- Trench Shield
- Anti Material Rifle (Anti-tank rifle)
- Sacrificial Knife / Sword / Knife
- Submachine Gun
- Blasphemous Staff
- 32mm base
- Tactical Pile of Skulls with barnacles


This is the last release for my Tribes and Patreon for July! The kit comes pre-supported, non-supported and with Lychee-files. Everything is test-printed, but adjust the pre-supports as you see fit.


Scale: 32mm (miniature in the picture is standing on a 32mm base)
Size: Height approx. 4cm (40mm).
Printability: Resin recommended (test printed)

This kit includes the most feared and most loved Naval Raider Artillery Witch! If you lack the ability to teleport naval mines from the hell-factories, here is the key piece you can add to your Heretical Forces!

The kit is mostly mono-pose, but I split it in a way that it'll allow digital kitbashing. F.ex the head should be easily changeable if you want to kitbash, or even just use some other head from another kit.


There are two possible variants for the Naval Artillery Witch, one is with the floating mine above her head, another is without. Also included two different hand poses for left hand, with index and the other with middle finger pointing upwards.

This is my first release with Lychee. So bear with me while I make the transition from Chitubox into Lychee. The kit comes pre-supported, non-supported and with Lychee-files. Everything is test-printed, but adjust the pre-supports as you see fit.


Includes:
- Heretic Naval Raider Artillery Witch - 2x variants, without floating sea mine and with floating sea mine
- 2x Hand variants
- 1x Naval Sea Mine (separate)
- 32mm + 25mm base


Scale: 32mm (miniature in the picture is standing on a 32mm base
Size: Height without the floating sea mine is approx. 5cm (50mm).
Printability: Resin recommended (test printed)

UPDATE: Included Scaled Down version (82.5% of the original). This size makes the model fit other TC range a bit better I think. :)

From the Dark Depths of the Cold Artic Sea they rise... The Naval Heretic Anointed!

This is 30+ part multi-kit of your dreams (and from the nightmares of your enemies). It includes the most essential weapon options, multiple different poses and head options for your Naval Anointed.

Includes:
- 8x Naval Heretic Anointed torso+legs (Includes 2 neutral, 1 running and 1 walking pose - with large gaspacks and without the gaspacks)
- 7x head variants
- Weapons / equipment:
-- Anti Material Rifle (AMR), 2h
-- Naval Hammer, 2h
-- Hellblade, 1h (3x different poses)
-- Naval Hammer, 1h (3x different poses)
-- Naval Trench Shield, 1h (2x different poses)
-- Submachine Gun, 1h (2x different poses)
-- Heavy Flamer, 1h
-- 2x empty arms/hands, 1h (for digital kitbashing)
- All weapon/equipment also as single files (no arms attached)
- 32mm base

All the arms can be mirrored if you want to create more variety and enable even more combinations!

Every file comes pre-supported, non-supported and with Lychee-files. Everything is test-printed, but adjust the pre-supports as you see fit.

This is the last release for my Tribes and Patreon for September 2025!

Scale: 32mm (miniatures in the pictures are standing on a 32mm base)
Size: Height approx. 4.5-5cm (45-50mm).
Printability: Resin recommended (test printed)